Lowering and Performance Links Available For The Following:
(*Click on the item below to go to that site)
Air Pro Fork
For fork equalizers & bleeders.
Aprilia 06-up RXV/SXV/450/550
Lowers rear 1 3/4".
Beta 2010-up All models, (RR, RS and Xtrainer) except EVO.
Lowers rear 1 9/16".
BMW F650CS
Belt Drive
BMW F650 & Aprilia Pegasus/Pegaso
Non-Fuel Injected.
1" & 2" lowering links available.
BMW 2000-up F/G650iGS/Dakar/Sertao (single cylinder only)
1" & 2" lowering links available.
Gas/Gas 2001-2011
200/250/300/450FSE
Gas/Gas 2013 EC250/300 and 2014-up dirt models both 2 and 4 stroke.
1 1/2" rear lowering.
Honda 2013-up CB500 & CBR500
1 3/8" Rear Lowering.
Honda 2000-up
CR125/250
Honda 
CRF150R/BW
1 3/4" rear lowering.
Honda 
CRF150F/230F
Honda 08-up
CRF230L/M Dual Sport & 98-02 SL230.
Honda 2013-up CRF250L Dual Sport.
1 3/4" rear lowering.
Honda CRF250R/X/
450R/X
Honda 2010-up
CRF250R
3/8" 7/8" & 1.6" lowering lengths available.
Honda 2009-up
CRF450R.
3/8" 7/8" & 1.6"  lowering lengths available. 
Honda 2012-13 NC700
1 3/8" Rear Lowering.
Honda 2014-up CTX700N/ND
1 3/8" Rear Lowering.
Honda 1986-95 XR250R & 85 only XR350R
Honda 96-up
XR250/400R
Honda 85-2000 XR600R
Honda 93-UP XR650L
Air cooled 
Honda 99-UP XR650R
liguid cooled
Husqvarna 03-07 Four Stroke & 08-up SM610/TE610
3/4"-1.5" Rear Lowering on most models.
Husqvarna 08-early 2014
Fits:TC/TE/TXC/250/310/450/510, MR450/510, 09-up TC/WR125 & 010-up CR125.
1" & 1.5" Rear Lowering.
Husqvarna/KTM 2014-up
Fits: FC/FE/FX/TX/TC/TE/125/250/
300/350/450/501.
3/8", 3/4", & 1 1/4" rear lowering on some models.
Husqvarna 2013-up TR650 Terra & Strada
1" & 1 3/4" Lowering Links.
Husqvarna 2016-up 701.  See web-page or order form for all lowering amounts.
Kawasaki 
KDX200/220
95-up
Kawasaki KL250
Super Sherpa
2000-up
Kawasaki KL600
Fits 84-86.  2.5" rear lowering.
Kawasaki KLR250
85-up
Kawasaki KLR650
Fits:  87-07 KLR650. 
1.25" & 2" Rear Lowering Links Available.
Kawasaki KLR650
Fits:  08-up KLR650.  1.25" &  2" Rear Lowering Links Available. 
Kawasaki KLX140
Fits 2006-up.  1 3/4" rear lowering.
Kawasaki 
KLX250/300
94-up. 3 Lengths. 
Also Fits: 06-up KLX250S Dual Sports & 09-up KLX250SF Supermotard.
Kawasaki KLX400
Fits: 2003
Kawasaki KLX450R 
Fits: 2008-up.
Kawasaki KLX650
Fits:  93-96 KLX650 
1 5/8" Rear Lowering.
Kawasaki 
KX65/RM65
2000-up KX65 & 03-up RM65.
Kawasaki 
KX80/85/100
91-up  Also fits: 03-up RM100
1" & 1 3/4" lowering links available.
Kawasaki KX125/250
1996-03
Kawasaki
KX125
Fits: 2004-07 Two Stroke
Lowers rear 1 1/4 inches
Kawasaki 
KX250
Fits: 2004 Two Stroke
Lowers rear 1 3/8th"
Kawasaki 
KX250
Fits: 2005-up Two Stroke
3/4" & 1 5/8" rear lowering lengths.
Kawasaki KX250F
Fits: 04-05 Four Stroke
Lowers rear 1 1/4"
Kawasaki KX250F/450F
Fits: 2006-up
2011-up KTM 250/350/450.
Fits:  2011-up 250SX/XC-F/
350SX/XC-F/450SX.
3/4" & 1 1/4" Rear Lowering.
2012-up KTM 125/150/250SX/XC & 300 XC Two Strokes
Fits: 2012-up two strokes with
the linkage style suspension.
3/4" & 1.25" rear lowering.
KTM: Adventure, Duke, & 660 Rallye/SMC. All LC4's & 625 SXC.
See Order Form for lowering amounts.
KTM 690 
Fits: 08-up Enduro/SMC.
Lowers rear 1" & 1 5/8"
KTM 690 Duke
Fits: 07-up Duke & 07 Supermoto Lowers rear 1 1/4".
2004-up Sherco SE250/300/450/510
Lowers rear 1" & 1.75"
Suzuki Gladius SFV650
Fits: 2009-up 
Lowers rear 1 1/8"
02-up Suzuki V-Strom DL650 & 02-13 DL1000
3/4" & 1 1/8" lowering links.
Also fits 03-up SV650 3/8 & 3/4" lowering.
2014-up Suzuki V-Strom DL/1000
1 1/8" lowering links.
**Will not fit earlier V-Stroms.
Suzuki DR250/S & DR350/S/E
1990-1999
Suzuki DRZ250E
Suzuki DRZ400E/S/SM
2000-up
Suzuki RM125/250
Fits: 98-2000. 
Suzuki RM125/250
Fits: 2001-2003.
Suzuki RM125/250
Fits: 2004-07.
Suzuki RMZ250
Fits:  2004-06 Four Stroke
Lowers rear 1 1/4".
Suzuki RMZ250/450
Fits:  07-09 RMZ250 & 05-09 RMZ450.
Suzuki RMX450Z & RMZ250/450
Fits:  2010-up 
3/4" & 1 5/8" rear lowering.
TM125/144/250/300 
2 stroke & 250/450/530/660 
4 stroke MX & Enduro
Fits:  2008-up. 1 5/8" & 2 5/8" rear lowering.
Yamaha FJR1300 Sport Tour
Fits:  2003-05, Lowers rear 7/8".
Yamaha FJR1300 Sport Tour
Fits: 2006-up, Lowers rear 7/8".
Yamaha TTR250
1993-up
Yamaha YZ & WR lowering kits will NOT
be available.  Thanks 
for all your requests. 

Other Products Available:

Suzuki DR650 Eibach
883 Spring Adapter
Suzuki Dualsport 2" Mirror Extenders
"T"-Handle Extended FuelScrews Available For: KTM/CRF/DRZ/KXF/ RMF/WR/YZF and now for the Kawasaki KLR250/650/KLX250 dual sport. Honda CRF230/XR250/400/
600/650 and TRX450 Four Wheeler.
Extended Fuel Mixture Screws Also Available For: DR200/250/350 dirt model/S/SE, DRZ400S, DR650 SE models.
See Order Form for complete Extended Fuelscrew listings.
KoubaLink.com

Installation Instructions
Fits: 2016-up Honda CRF1000.  (Africa Twin) 
PN:  CRF1000-1.  Lowers the rear 7/8".
Fits both manual and automatic transmission models.
 


CRF1000-1 link shown above.

1) Raise the rear of the motorcycle with a jack under the engine so the rear wheel is just slightly off the ground.  The best way is to tie the handle bars down to floor side mounts so the bike cannot tip over.  Be careful where you put the jack and try to get it towards the rear of the engine so you are mainly lifting the rear.  We use a wood 2 X 8 about 10" long on top of the jack. If you have the optional center stand then just pull it up on that and your good to go. Remove the two 17 mm nuts from the link mounting bolts. (both 14 mm headed mounting bolts come in from the left) Remove the two 8 mm Allen headed bolts from the left footpeg/sidestand mount to allow the front link mounting bolt to come out the left side.  If you have the center stand then it must be down to remove the front link mounting bolt.  Push both link mounting bolts out the left side.  *The swingarm may need to be raised slightly to allow the first bolt to slide out freely.

2) The new link comes with only the bearings and seals, so install the center bearing sleeve from your OEM link into the new KoubaLink. Put some grease inside the Koubalink's bearings and also on the center sleeve before installing them in the KoubaLink.  Install the Koubalink by holding it up inside the front  mounting bracket with the grease fittings facing down and back, push the front mounting bolt in from the left side.  You will have to raise the swing arm slightly to allow the rear link eyes to align with the rocker eye before pushing the rear mounting bolt in.  You may want to pump some grease into the zerk now as sometimes tightening the front mounting bolt nuts can seal the bearings too tight to allow the air to escape.  Install the 17 mm nuts on the mounting bolts and torque to approx. 40 lbs-ft.

3) Put some blue or red thread lock on the threads of the two 8 mm Allen headed footpeg mounting bolts and reinstall the left foot peg/side stand mount.  Torque to 40 lbs-ft. 

4) You can slide the fork tubes up a bit (maximum 1/2" from when the flange on the top caps are flush with the top of the fork tube) to get more lowering, but how much you need to slide them up will depend on the amount of rear race sag your running and how you prefer it to ride. We do not recommend sliding the fork tubes up from the stock position unless quicker turning is required.  Just keep in mind that lowering the rear more than the front slows the steering but also makes it more stable on the striates and visa versa.

*Disclaimer:  Raising or lowering the rear more than the front can change the geometry and could affect the handling, so be careful out there. 

If you like what the KoubaLink does for your suspension, please tell everyone, if you do not, please tell us.  We can be contacted at our email address below and are always interested in your questions or comments.  Thanks for purchasing our products.

Norm Kouba
Email:  njkouba@ix.netcom.com
 
 

Ordering info. and pricing can be found on our ORDER FORM.

ABOUT US | FAQ | CUSTOMER FEEDBACK | ORDER FORM
 


Right side view when installing.


 

OUR GOAL
IS TO BUILD
THE BEST POSSIBLE
SUSPENSION COMPONENTS
AND PROVIDE
THE CUSTOMER
WITH THE HIGHEST
LEVEL OF SERVICE. 
ALL OUR PRODUCTS ARE MADE IN THE USA
 
 
 
 

© Copyright 2017 KoubaLink



 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Back To Top Of Page